Orelia

Live in Orelia and need an auto electrician? Orelia sits closest to the industrial area of the Kwinana suburbs, so alongside everyday car repairs there's a steady stream of work utes, shift workers' cars and tradie setups.

• Need it fixed? Get a quote from an auto electrician near Orelia, including mobile businesses that come to you.
• Doing it yourself? Order quality parts online from Ozautoelectrics.
• Auto electrician in Orelia? List your business on this site to win more customers.
• Are you a trade customer? Apply here for trade pricing.

How can we help?

Need it fixed?

Get a quote from a local Orelia auto electrician, for anything from a flat battery to a full fit-out.

Get a quote

Buying parts?

Quality auto electrical parts from Ozautoelectrics, an established Australian supplier since 2010, dispatched through a nationwide network. For retail and trade buyers.

Shop parts

Doing it yourself?

Free step-by-step guides written for Western Australia conditions, with the parts you’ll need listed for each job.

Browse DIY guides

Auto electrician in Orelia?

Are you an auto electrical business? List your business on this site.

List your business on this site

Common auto electrical jobs in Orelia

Development began in Orelia in 1952, as Kwinana's industrial area took shape, and it's still a short drive along Thomas Road to the industrial sites. Older homes on the western side and newer homes to the east mean a broad mix of vehicles.

Flat after a night shift

Shift workers often come back to a car that has sat for twelve hours, sometimes in cold overnight air, and find it won't start. Short drives home and back don't help. A battery that's getting old will show it first in winter. Test it before it lets you down, and if the car often sits for days, a battery maintainer is worth having. Our guide on why a battery keeps going flat covers the usual causes.

Get it done: get a quoteDo it yourself: shop jump starters

Work lights and site beacons

Utes heading to Kwinana Beach or Naval Base sites often need a beacon and work lights to meet site rules. LED units draw less current and handle vibration better than older halogen lights. Mount them securely, run the cable through grommets and protect it from the tray edge, and use a relay and fuse for anything that draws much current. A properly wired switch on the dash makes life easier at 5am.

Get it done: get a quoteDo it yourself: shop LED work lights

Trailer lights that won't play

Box trailers in Orelia get used hard for rubbish runs and tradie gear, and the lights often suffer first. Most faults come down to a poor earth, a corroded plug or a broken wire where the cable flexes near the drawbar. Test the plug on the vehicle with a test light before blaming the trailer. Our guide on wiring a 7-pin trailer plug shows which pin does what.

Get it done: get a quoteDo it yourself: shop trailer plugs

Fusing your own accessories

Lots of people add a USB charger, UHF radio or light bar themselves, and a missing or wrongly placed fuse is a common cause of melted wiring. The fuse should sit as close as possible to where the power is taken from, so the whole cable is protected. Pick the fuse to suit the cable size, not just the device. Our guide on where to put the fuse when wiring an accessory explains why.

Get it done: get a quoteDo it yourself: shop inline fuse holders

Reading the warning lights

A check engine light doesn't always mean a big bill. A cheap OBD2 scanner reads the fault code and gives you a starting point, whether it's a loose fuel cap, a sensor or something that needs attention now. Write the code down before clearing it, so a technician can see what happened. Our guide on reading fault codes with an OBD2 scanner shows how.

Get it done: get a quoteDo it yourself: shop OBD2 scanners

Orelia auto electrical questions

Do I need a relay for a light bar on my ute?

Yes, for anything except very small lights. A relay lets a small switch control a heavy current, so the switch and dash wiring don't overheat. Use cable sized for the light's current, fuse it near the battery and run a good earth. Most light bar wiring kits include the relay, fuse and switch.

Should I clear a fault code myself?

You can, but write it down first. Clearing a code turns off the light without fixing the cause, and if the fault is real the light will come back. Some faults, like a flashing check engine light, mean you should stop driving and get the car looked at quickly to avoid damage.

Auto electricians near Orelia

See the Kwinana listings for auto electricians and mobile services that cover Orelia.

Looking for parts in Orelia?

Looking for parts in Orelia? Search LED work lights, trailer plugs and OBD2 scanners: quality parts from Ozautoelectrics, dispatched Australia-wide.

Nearby: Medina · Parmelia · Bertram · Calista · Postans

Auto electricians in Orelia

Own one of these businesses? Find it below and tap Claim it free to add your phone, website, hours and photos. Not listed yet? Use the claim form and we’ll add you.

No auto electricians are based in Orelia itself yet. Businesses in the Kwinana area service Orelia.

Is your business missing? Tell us and we’ll add it free.

Run an auto electrical business in Orelia?

• New to Ozautoelectrics? Apply for trade pricing on quality auto electrical parts.
• Already a trade customer? Log in and order parts at your trade price.
• Want more local customers? List your business on this site so drivers in Orelia can find you.