Live or work in Innaloo and need an auto electrician? Large shopping centres, homemaker stores and a big cinema complex keep delivery vans, courier fleets and shoppers' cars moving through the suburb all day.
- Need it fixed? Get a quote from an auto electrician near Innaloo, including mobile businesses that come to you.
- Doing it yourself? Order quality parts online from Ozautoelectrics.
- Auto electrician in Innaloo? List your business on this site to win more customers.
- Are you a trade customer? Apply here for trade pricing.
Sponsored
Be the auto electrician this area sees first
Reach drivers, tradies and fleet operators in this part of Perth. See sponsor spots and prices.
How can we help?
Need it fixed?
Get a quote from a local Innaloo auto electrician, for anything from a flat battery to a full fit-out.
Get a quoteBuying parts?
Quality auto electrical parts from Ozautoelectrics, an established Australian supplier since 2010, dispatched through a nationwide network. For retail and trade buyers.
Shop partsDoing it yourself?
Free step-by-step guides written for Western Australia conditions, with the parts you’ll need listed for each job.
Browse DIY guidesAuto electrician in Innaloo?
Are you an auto electrical business? List your business on this site.
List your business on this siteInnaloo at a glance
- Area: Stirling, City of Stirling
- Neighbours: Osborne Park, Stirling, Karrinyup, Doubleview, Gwelup, Woodlands
- Main roads: Scarborough Beach Road, Odin Road, Oswald Street, Stephenson Avenue, Mitchell Freeway
- Typical work: work van accessory wiring, reversing cameras on vans, flat batteries in big car parks, cable sizing for fridges and inverters, keyless entry faults
Common auto electrical jobs in Innaloo
Innaloo is about 9 km north-west of the CBD, between Osborne Park and Doubleview. Much of the area was once market gardens around a swamp that was drained into Herdsman Lake, and today its retail centres sit beside an established residential area.
Wiring a work van properly
Delivery and service vans around Innaloo often carry fridges, inverters, lighting and charging for handheld devices. Each load needs the right cable size for its current and run length, or voltage drops and wires heat up. Our guide on what size cable you need for 12V explains how to choose. Good quality crimps and a fuse near the battery for each circuit complete the job.
Get it done: get a quoteDo it yourself: shop battery cables
Reversing cameras on vans
Loading docks and tight retail car parks are tough places to reverse a van with no rear windows. A rear camera mounted high on the back doors gives a far better view than a bumper camera. Wiring has to pass through the door hinge area, so use a flexible loom with a proper grommet to avoid breaks from repeated opening and closing.
Get it done: get a quoteDo it yourself: shop reversing cameras
Won't start after the movies
Coming back to a car that won't start after a long session at the cinema is a common story. Headlights left on, a door not fully closed or simply an old battery that finally gives up are the usual causes. If the car clicks or cranks slowly, the battery is the first suspect. Our guide on why a car battery keeps going flat helps if it happens more than once.
Get it done: get a quoteDo it yourself: shop jump starters
Central locking on fleet vans
Vans that are locked and unlocked dozens of times a day wear out door lock actuators, especially on the sliding and rear doors. A door that won't lock with the others, or locks and then pops back up, usually has a failed actuator or a broken wire where the loom crosses into the door. Replacing the actuator is a common, fairly quick repair.
Get it done: get a quoteDo it yourself: shop door lock actuators
Innaloo auto electrical questions
Where should a reversing camera go on a van?
On a van without rear windows, mounting the camera high on the rear doors or the roof line gives the best view of the area behind and of the ground near the bumper. Run the cable through a flexible door loom, seal the camera's connection and power it from the reverse lights through a fuse.
Why does one van door not lock with the others?
Usually the lock actuator in that door has failed, or a wire has broken where the loom bends between the body and the door. Sliding doors are especially prone to this. Listen for a click from the door when you press the remote, as no sound usually points to the actuator or its wiring.
Local tip for Innaloo
If you run vans out of Innaloo, open each sliding and rear door wide once a month and look at the rubber boot where the wiring crosses into the door. A cracked boot or exposed wires is an early warning. Fixing it before a wire breaks avoids a van that won't lock at the end of a shift.
Auto electricians near Innaloo
See the Stirling listings for auto electricians and mobile services that cover Innaloo.
Advertisement
Looking for parts in Innaloo?
Looking for parts in Innaloo? Search battery cables, reversing cameras and door lock actuators: quality parts from Ozautoelectrics, dispatched Australia-wide.
Search auto electrical parts
Searches the full range at Ozautoelectrics, opening in a new tab. Popular: dual battery · LED light bars · trailer plugs · fuses
Nearby: Osborne Park · Stirling · Karrinyup · Doubleview · Gwelup · Woodlands
Auto electricians in Innaloo
Own one of these businesses? Find it below and tap Claim it free to add your phone, website, hours and photos. Not listed yet? Use the claim form and we’ll add you.
No auto electricians are based in Innaloo itself yet. Businesses in the Stirling area service Innaloo.
Is your business missing? Tell us and we’ll add it free.
Run an auto electrical business in Innaloo?
- New to Ozautoelectrics? Apply for trade pricing on quality auto electrical parts.
- Already a trade customer? Log in and order parts at your trade price.
- Want more local customers? List your business on this site so drivers in Innaloo can find you.