Auto Electrical Perth

Dash cam installation in Perth

Need dash cam installation in Perth? Plugging a camera into the cigarette lighter works, but a hardwired install looks tidier, frees up the socket and lets the camera keep watch while the car is parked. Below you’ll find auto electricians listed in Perth and a plain explanation of what a proper fit involves.

Auto electricians in Perth who may fit dash cams

80 businesses listed.

This list draws on our mobile and general auto electrical categories. Most auto electricians fit dash cams, but not every business advertises it, so confirm when you call. For a wider choice, browse all Perth auto electricians.

What a hardwired install actually involves

There are two common approaches. The first is a fuse-tap kit that draws power from a suitable circuit in the fuse box. The second is a dedicated circuit with a low-voltage cut-off module. Either way, the aim is the same: power the camera when you drive, let it record in parking mode when you don’t, and switch it off before the battery gets too low to start the car.

A rear camera adds another step, because the cable has to be run back through the cabin, under trims and headlining, to the rear window or tailgate. On a wagon or ute that can mean working around tailgate looms and rubber seals.

Why late-model cars are worth leaving to a professional

Many newer vehicles have a cluster of driver-assist cameras and sensors behind the mirror, exactly where most people want to mount a dash cam. Curtain airbags run along the A-pillars and roof lining, so a cable tucked into the wrong gap can interfere with how they deploy. An experienced installer knows which routes are safe, which fuses are suitable and how to avoid upsetting the car’s electronics.

Sorting things out before the appointment

  • Buy the camera and its matching hardwire kit first, or ask the installer what they recommend
  • Decide whether you want front only, or front and rear
  • Think about parking mode: a car left in full sun through a Perth summer gets very hot inside, so check the camera’s rated operating temperature
  • Insert and format the memory card so the install can be tested properly

Many mobile operators will fit a dash cam in your driveway or at work, so see mobile auto electricians in Perth if that suits. Fleet operators based in industrial areas such as Kewdale and Welshpool may want cameras across several vehicles, so ask whether they can be done in one visit. Truck installs are covered on our truck auto electrician page, and if it’s a reversing camera for a van you’re after, start with caravan and trailer wiring.

Fit dash cams for Perth drivers or fleets? Make sure you show up here: claim your free listing or add your business to the directory.